CV. Zakky Jaya




Source: Grup FB BURSA KERJA AE

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

PT. AIA Financial

Company Profile:
AIA Financial perusahaan multinasional yang bergerak dalam bidang pelayanan keuangan.

Qualifications:
FINANCIAL ACATYA CONSULTANCYANT/ AGEN
1. Usia 20-25 tahun (pria/ wanita)
2. Pendidikan minimal SMU/ sederajat
3. Memiliki kendaraan pribadi (roda 2)
4. Tangguh, suka tantangan dan punya keinginan kuat untuk sukses

AGENCY MANAGER/ SUPERVISOR
1. Usia 25-30 tahun (pria/ wanita)
2. Pendidikan minimal D-III
3. Memiliki kendaraan pribadi (roda 2/ roda 4)
4. Punya pengalaman marketing/ memimpin tim penjualan
5. Memiliki leadership yang kuat
6. Tangguh, suka tantangan dan punya keinginan kuat untuk sukses

SENIOR AGENCY MANAGER/ UNIT MANAGER
1. Usia 30-35 tahun (pria/ wanita)
2. Pendidikan minimal sarjana (S-1)
3. Memiliki kendaraan pribadi (roda 2/ roda 4)
4. Punya pengalaman marketing/ memimpin tim penjualan minimal 2 tahun
5. Memiliki leadership yang kuat, terbiasa bekerja dengan target
6. Tangguh, suka tantangan dan punya keinginan kuat untuk sukses

Penempatan area Ngawi dan sekitarnya. 

Send your application to:
PT. AIA FINANCIAL 
Jalan Yos Sudarso No. 344 Solo - 57155 (UP. Ibu Rahma Elfariani)
No. HP.  085784999957-087858064046
PIN BB 760E9698

NB: Sedang ekspansi di kantor baru dalam waktu dekat
Alamat: Ruko Bandar Sari Raya No.5 Jl. Raya Magetan-Maospati, Bandar, Magetan



 
Source: Grup FB INFO LOWKER

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

Luwes Ngawi

Open Recruitment for: TEKNISI di Mr. Games

Qualifications:
1. Pria
2. Usia maksimal 26 tahun.
3. Pendidikan minimal SMK Audio Video/ Otomotif/ Teknik
4. Penampilan Menarik
5. Jujur, Ulet, mau bekerja dalam team.

Facilities:
1. Gaji UMK Ngawi.
2. Tunjangan jabatan.
3. Voucher pulsa.
4. Insentif lembur.

Send your application to:
LUWES NGAWI (Mr. Games)
Jalan Ahmad Yani
Ngawi


Source: Grup FB LOWONGAN KERJA NGAWI DAN SEKITARNYA

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

Adira Kredit

Open Recruitment for: MARKETING

Qualifications:
1. Pria/ Wanita.
2. Pendidikan minimal SMP dan SMA/ Sederajat.
3. Tertarik kerja lapangan.

Documents:
1. Surat lamaran
2. CV
3. Fotokopi Ijazah
4. Fotokopi KTP  
5. Pas foto 4x6

Send your application to the following address:
ADIRA KREDIT NGAWI
Jalan Diponegoro - Pelem
Ngawi


Source: Grup FB LOWONGAN KERJA NGAWI DAN SEKITARNYA

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

Bank BTN

General Qualifications:
1. WNI
2. Diutamakan laki-laki kecuali posisi sekretaris
3. Belum menikah
4. Usia ODP maksimal 26 tahun, belum berulang tahun ke-27 per 31 Maret 2014
5. Usia selain ODP maksimal 24 tahun, belum berulang tahun ke-25 per 31 Maret 2014
6. Tidak memiliki hubungan keluarga Ayah/ Ibu/ Kakak/ Adik/ Anak dengan pegawai BTN
7. Tinggi badan laki-laki minimal 160 cm dan perempuan 155 cm.
8. Berat badan proporsional
9. Sudah memegang ijazah asli (tidak menerima SKL)

Specific Qualifications:

OFFICER DEVELOPMENT PROGRAM (Kode: ODP)
1. Pendidikan minimal S-1 dengan IPK 3.00 skala 4.00.
2. Diutamakan jurusan dari fakultas Teknik, Ekonomi, Ilmu Komputer/ Informatika, MIPA, Hukum & Psikologi.
3. TOEFL 500 dan TPA 550 (Akan melalui tes).
4. Bersedia ditempatkan di seluruh wilayah kerja Bank BTN (seluruh Indonesia).
5. Wilayah penyelenggaraan rekrutmen di BTN Kantor Pusat (Jakarta), KC Semarang, Yogyakarta, Malang, Makassar, Medan, Padang dan Palembang.

SUPPORTING STAFF GRADE 11 (Kode: SS-BSS)
1. Pendidikan S-1/ D-III (diutamakan D-III) dengan IPK 3.00 skala 4.00.
2. Semua jurusan.
3. Bersedia ditempatkan di Jawa Barat, Papua, dan Sulawesi.
4. Wilayah penyelenggaraan rekrutmen di BTN KC Cirebon, Jayapura, dan Palu.

SUPPORTING STAFF GRADE 9 (Kode: SS-ADS)
1. Pendidikan D-III dengan IPK 2.75 skala 4.00.
2. Semua jurusan.
3. Bersedia ditempatkan di Jawa Barat, Papua, dan Sulawesi.
4. Wilayah penyelenggaraan rekrutmen di BTN KC Cirebon, Jayapura, dan Palu.

CUSTOMER SERVICE (Kode: CS)
1. Pendidikan minimal D-III dengan IPK 2.75 skala 4.00.
2. Semua jurusan.
3. Bersedia ditempatkan di JABODETABEK, Jawa Barat, Jawa Timur dan Sulawesi Tengah.
4. Wilayah penyelenggaraan rekrutmen di BTN Kantor Pusat (Jakarta), KC Cirebon, Malang, dan Palu.


TELLER SERVICE STAFF (Kode: TS)
1. Pendidikan minimal D-I dengan IPK 2.75 skala 4.00.
2. Semua jurusan.
3. Bersedia ditempatkan di JABODETABEK, Papua Barat, dan Jawa Timur.
4. Wilayah penyelenggaraan rekrutmen di BTN Kantor Pusat (Jakarta), KC Jayapura, Semarang, dan Malang.

SEKRETARIS (Kode: SKR)
1. Pendidikan minimal D-III dengan IPK 2.75 skala 4.00.
2. Semua jurusan, diutamakan jurusan Sekretaris.
3. Bersedia ditempatkan di KC Bangkalan, Kediri, Madiun, Purwakarta, Yogyakarta, dan KCS Tasikmalaya.
4. Wilayah penyelenggaraan rekrutmen di BTN Kantor Pusat (Jakarta), KC Malang dan Yogyakarta.

How to Register:
1. Memilih menu karir, klik registrasi online.
2. Isi field sesuai dengan data yang dimiliki.
3. Mengisi lowongan pekerjaan sesuai dengan wilayah penyelenggaraan rekrutmen, apabila memilih lowongan yang tidak ada di wilayah rekrutmen, maka proses seleksi lamaran tidak akan dilakukan.
4. Untuk field upload foto harap diabaikan dan tidak meng-upload foto.
5. Pastikan nomor telepon/ HP diisi dengan benar.
6. Setelah itu klik kirim lamaran.

Other Informations:
1.  Pendaftaran dibuka sejak tanggal 26 Februari s.d 11 Maret 2014.
2. Tidak melayani pendaftaran melalui penyerahan berkas lamaran di Kantor Cabang penyelenggara.
3. Harap memperhatikan lokasi wilayah rekrutmen yang dipilih sesuai posisi yang dibuka.
4. Setiap tahapan seleksi berlaku sistem GUGUR dan keputusan panitia tidak dapat diganggu gugat.


Source: Bank BTN

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

PT. Pos Indonesia (Persero)

Company Profile:

PT Pos Indonesia (Persero) merupakan perusahaan pemerintah Indonesia berbentuk BUMN yang bergerak dalam usaha pengiriman jasa seperti paket logistik, surat dan paket barang. PT Pos Indonesia (Persero) telah banyak membantu masyarakat luas dalam usaha pengiriman barang dan jasa jarak jauh secara aman dan nyaman serta sampai tujuan dengan tidak ada yang kurang.

PT Pos Indonesia (Persero) sudah ada sejak zaman penjajahan ini telah banyak mengalami perubahan, perubahan-perubahan itu tentunya menuju kearah yang lebih baik dan sesuai dengan tuntutan keadaan zaman modern seperti sekarang. PT Pos Indonesia (Persero) senantiasa memberikan pelayanan maksimal sesuai kebutuhan pelanggan, jasa yang diberikan perusahaan tergantung dari pada jenis paket atau produk yang digunakan, beberapa produk layanan pengahantar barang atau surat telah ada sesuai dengan seberapa mendesak barang tersebut misalnya paket express, paket standar serta paket kilat untuk pengiriman dalam jangka waktu yang cepat.

Open Recruitment for: TELLER

Requirements:
1. Pria atau wanita
2. Pendidikan minimal Diploma tiga
3. Single
4. Mampu berkomunikasi dengan baik
5. Teliti dan jujur
6. Berpenampilan menarik
7. Mampu mengoperasikan komputer
8. Mampu berkomunikasi dengan baik
9. Siap bekerja dibawah tekanan
10. Penempatan diseluruh Indonesia sesuai dengan domisili
 
Documents:
1. Surat lamaran
2. CV
3. Foto terbaru
4. Fotokopi ijazah

Send your application to the following address:
PT. POS INDONESIA (PERSERO)
PO BOX SM 50001


Source: DEPNAKER

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

CV. Nayya Grafika (Adi Perkasa Group)

Company Profile:
Merupakan perusahaan nasional penerbitan dan percetakan.

Open Recruitment for:
1. Tenaga Marketing (10 orang)
2. Tenaga Gudang (2 orang)
3. Sopir (2 orang)
4. Administrasi

Requirements:
1. Surat lamaran lengkap dengan pas foto 4x6 (2 lembar)
2. Ijazah SMA/ SMK/ S-1
3. Memiliki SIM C/ A
4. Memiliki kendaraan sendiri
5. Laki-laki usia 18-30 tahun

Send your application to the following address:

CV. NAYYA GRAFIKA
Dsn. Krajan, RT/RW. 015/001 Ds. Kedungputri, Kec. Paron
Ngawi


Source: Group FB LOWONGAN KERJA NGAWI DAN SEKITARNYA  

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

Kebab Turki



Source: Group FB INFO LOWKER

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

PROSPEKLINES



Source: Group FB BURSA KERJA AE

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

PT. Sahabat Mandiri Jaya Perkasa (Dealer Motor)

Open Recruitment for: Marketing Executive 

Requirements:
1. Pria/ wanita
2. Ijazah min. SMA/ sederajat
3. Punya kendaraan sendiri dan SIM C

Facilities:
1. Gaji pokok
2. Uang makan
3. Bonus penjualan
4. Uang transport

Send your application to the following address:

PT. SAHABAT MANDIRI JAYA PERKASA
Jalan Raya Ngawi-Geneng 34
Geneng, Ngawi


Source: Group FB BURSA KERJA AE

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

Perkasa Telkomselindo

Company Profile:
Sebuah perusahaan yang bergerak di bidang distribusi & pelayanan yang bekerjasama dengan salah satu provider telekomunikasi seluler terkemuka di Indonesia.

Open Recruitment for:
1. SFD (Sales Force Device)
2. Account Officer

Requirements:
1. Perempuan/ Laki-laki
2. Pendidikan min. SMA/ sederajat
3. Berpenampilan menarik
4. Menyukai pekerjaan lapangan, mau menjual produk dengan sistem target, jujur, ulet, tanggung jawab
5. Penempatan area Ngawi

Send your application to the following address:

PERKASA TELKOMSELINDO
Jalan Ronggowarsito No. 28A
Ngawi
(Bisa kirim via pos)


Source: Group FB BURSA KERJA AE

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

Primagama

Company Profile:

Primagama adalah lembaga bimbingan belajar (LBB) saat ini membutuhkan Pengajar/Tentor untuk mata pelajaran Matematika, Fisika, Kimia, Bahasa indonesia, Ekonomi, Akuntansi, Geografi, Sosiologi.

Open recruitment for: PENGAJAR/TENTOR

Requirements:
1. Pria/ wanita
2. Merupakan lulusan (S1) PTN
3. Punya penampilan menarik
4. Komunikatif dan familiar
5. Domisili Ngawi dan sekitarnya

Send your application to the following address:
PRIMAGAMA NGAWI
Jalan Teuku Umar 45 Ngawi
Telp. (0351) 748847 


Source: LowonganMadiun 

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

PT. Solo Motor Perkasa

Company Profile:

PT Solo Motor Perkasa adalah dealer resmi sepeda motor Yamaha, saat ini membutuhkan beberapa karyawan yang handal dan profesional untuk beberapa posisi berikut ini:

1. STAF ADMIN/ SALES COUNTER

Requirements:
1. Wanita
2. Umur tidak lebih dari 25 tahun
3. Pendidikan minimal SMU sederajat
4. Aktif dan komunikatif

2. DRIVER

Requirements:
1. Pria
2. Pendidikan SMU sederajat
3. Umur tidak lebih dari 35 tahun
4. Mempunyai SIM A

3. MEKANIK

Requirements:
1. Pria / wanita
2. Pendidkan SMK Otomotif
3. Umur maksimal 27 tahun

4. MARKETING EKSEKUTIF

Requirements:
1. Pria/wanita
2. Pendidikan SMU sederajat
3. Umur maksimal 30 tahun
4. Mempunyai SIM C

Send your application to the following address:
PT. SOLO MOTOR PERKASA
Jalan Ahmad Yani 97 Ngawi


Source: LowonganMadiun

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

PT. Vaganza Sukses Internasional

Company Profile:

VAGANZA yang berpusat di Surabaya, Indonesia berdiri sejak 1 Maret 2006. adalah Brand nasional yang bergerak dalam bidang distribusi produk home appliances berkualitas untuk keperluan rumah tangga melalui sistem penjualan langsung (direct selling), Brand Vaganza tumbuh berkembang dan berada di jajaran atas brand product home appliances yang di pasarkan secara direct selling di Indonesia.  Saat ini kami membutuhkan kandidat untuk bergabung bersama kami.

Vacancies:
1. AREA SALES MANAGER

Job Descriptions:
1. Melakukan koordinasi terkait wilayah kerja dan pengembangan team.
2. Bertanggung jawab atas kinerja Sales Promotor dan regulasi produk.
3. Melakukan inovasi dalam teknis penjualan.

Requirements:
1. Usia maksimal 35 tahun.
2. Pendidikan minimal D3 semua jurusan dengan  IPK min 3.00.
3. Memiliki pengalaman minimal 2 tahun menangani Team Sales pada Perusahaan Direct Selling.
4. Mampu menjual dalam target, disiplin, jujur dan mempunyai track record yang bagus dalam pencapaian penjualan.
5. Memiliki kemampuan yang baik dalam analisa pengambilan keputusan.
6. Memiliki kemampuan yang baik dalam hal komunikasi, kemampuan presentasi dan kemampuan interpersonal. 
7. Menguasai microsoft office (word, excel, power point).
8. Memiliki Sense of Leader yang kuat dan mampu mengkoordinasi kerja dalam suatu tim kerja.

Apply Online: Via Lokrr.com


2. OPERATION COORDINATOR

Job Descriptions:
1. Melakukan analisa kelayakan kredit dan pelayanan pasca penjualan
2. Melakukan koordinasi terkait pencapaian penanganan tagihan
3. Menciptakan hubungan dan suasana kerja yang harmonis di Departemen Operasi

Requirements:
1. Pria
2. Usia maksimal 30 tahun
3. Pendidikan minimal D3 segala jurusan dengan  IPK min 3.00
4. Mempunyai sepeda motor dan SIM C
5. Memiliki pengalaman minimal 2 tahun dengan jabatan yang sama pada Perusahaan Direct Selling
6. Memiliki kemampuan yang baik dalam analisa pengambilan keputusan kredit
7. Memiliki kemampuan yang baik dalam hal komunikasi, Koordinasi, Pemecahan Masalah dan kemampuan interpersonal
8. Menguasai microsoft office (word, excel )
9. Memiliki Sense of Leader yang kuat dan mampu mengkoordinasi kerja dalam suatu tim kerja
 
Apply Online: Via Lokrr.com 


Source: Lokrr.com

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

PT. Sumber Bening Lestari

Company Profile:

PT Sumber Bening Lestari, though short on history, is long on commitment to bring to you the finest bottled water in various packaging sizes. Every drop is bottled at source at Jalan Raya Suwayuwo 168 (Km.51) Pandaan, East Java, Indonesia. Our production facility is equipped with high standards of infrastructure at every critical point. We adopt a multiple-barriers approach from end to end, to bring you a quality product.

Open recruitment for: SUPERVISOR SALES WILAYAH

Requirements:
1. Pria
2. Pendidikan minimal lulusan S-1 semua jurusan
3. Pengalaman minimal 5 tahun sebagai marketing di perusahaan Consumer Good
4. Jujur, bertanggung jawab, kreatif, punya jiwa pemimpin, cerdas, cekatan, komunikatif dan pantang menyerah.
5. Memiliki kendaraan sendiri
6. Penempatan di wilayah Madiun, Magetan, Ponorogo, Ngawi dan Pacitan

Apply Online: via Lokrr.com

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

PT. Gasindo Graha Utama

Company Profile:
Merupakan perusahaan yang bergerak di bidang pemasaran peralatan LPG.

Open recruitment for:
1. MARKETING
2. DRIVER
3. TEKNISI
4. ADMINISTRASI

Requirements:
1. Surat lamaran kerja
2. Daftar riwayat hidup
3. Fotokopi KTP
4. Fotokopi ijazah terakhir
5. Pas foto ukuran 3x4 (2 lembar) dan 4x6 (2 lembar)

Facilities:
1. Gaji pokok
2. Bonus training
3. Bonus insentif
4. Uang makan
5. Transport
6. Mess

Send your application to: 
PT. GASINDO GRAHA UTAMA
Jalan Letjen Sutoyo No. 51
Jururejo, Ngawi
Telp. (0351) 746107
Atau
Prasetyo: 085735655222


Source: Grup FB INFO LOWKER

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

PT. Lia Mitra Usaha

Profile:
Merupakan salah satu perusahaan yang bergerak di bidang distribusi. Produk yang didistribusikan antara lain teh botol Sostro dan Milkuat.

Saat ini, PT. Lia Mitra Usaha membutuhkan:
1. SALES MOTORIS TEH BOTOL SOSRO (1 Orang)
2. SALES MOTORIS MILKUAT (4 Orang)

Requirements:
1. Pria/ wanita.
2. Motivasi tinggi untuk bekerja.
3. Jujur dan tanggung jawab.
4. Punya sepeda motor untuk operasional.

Fasilitas: Gaji pokok dan insentif yang menarik.

Bagi yang berminat, silakan kirimkan lamaran ke:
PT. Lia Mitra Usaha Depo Ngawi
Jalan Raya Ngawi-Solo Km 4 Watualang (Depan RM Notosuman Ngawi)


Sumber: LowonganMadiun

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

CV. Perkasa Telkomselindo

Posisi:
1. SPG REGULER
2. TELKOMSEL SALES ATTACK (TSA)

Requirements: 
1. Wanita
2. Usia 18-21 tahun
3. Berat badan proporsional
4. Berpenampilan menarik
5. Memiliki kemampuan komunikasi yang baik

Kirimkan:
1. CV
2. Foto (1 lembar)
3. Foto kopi KTP

Datang langsung atau kirimkan ke alamat:
Perkasa Telkomselindo
Jl. Ronggowarsito 28A 
Ngawi


Sumber: Grup FB BURSA KERJA AE

 

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

CV. Zakky Jaya

Profile: 
Merupakan distributor resmi pupuk bersubsidi saat ini membuka lowongan untuk menempati beberapa posisi. Berikut posisi dan beberapa persyaratan yang haru dipenuhi bagi para pelamar:

STAF ADMINISTRASI
Requirements:
1. Laki-laki
2. Usia maksimal 35 tahun
3. Minimal lulusan SMA/ Sederajat
4. Menguasai Microsoft Office
5. Mempunyai SIM C
6. Memiliki kendaraan sendiri
7. Beragama Islam
8. Mampu bekerja di bawah tekanan dan team work
9. Jujur, disiplin dan bertanggung jawab

SECURITY
Requirements:
1. Laki-laki
2. Usia maksimal 35 tahun
3. Minimal lulusan SMP/ Sederajat
4. Beragama Islam
5. Memiliki sertifikat bela diri
6. Jujur, disiplin dan bertanggung jawab

Bila Anda beminat untuk bergabung dengan CV. Zakky Jaya dan memenuhi kriteria di atas, segera kirimkan lamaran Anda langsung atau via pos ke alamat:

CV. Zakky Jaya
Jalan Teuku Umar Barat Nomor 07
Kel. Margomulyo, Kec. Ngawi, Kab. Ngawi
Telp. (0351) 747400 

SEBELUM: 31-JAN-2014


Sumber: Grup FB BURSA KERJA AE

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

PT. Galenium Pharmasia Laboratories

Profile:
Merupakan sebuah perusahaan farmasi nasional yang memproduksi OTC, ethical dan personal skincare.

Saat ini PT. Galenium Pharmasia Laboratories membutuhkan tenaga yang handal dan profesional sebagai:

MEDICAL REPRESENTATIVE

Requirements:
1. Usia maksimal 30 tahun.
2. Pendidikan minimal SMA/ SMK/ Sederajat.
3. Lebih disukai punya pengalaman marketing 1 tahun.
4. Punya kendaraan roda dua dan SIM C.
5. Motivasi kerja tinggi.

Bagi yang berminat silakan kirim surat lamaran, CV, dan pas foto terbaru dengan mencantumkan kode lamaran (posisi) dan area yang diminati (Ngawi) via email ke: nadya.ef@galenium.com.

Atau via pos ke alamat:
HRD PT. Galenium Pharmasia Laboratories 
Jl. Aditiawarman 67 Kebayoran Baru
Jakarta Selatan 12160


Sumber: LowonganMadiun

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

PT. Dipa Pharmalab Intersains-Div EsColab

Merupakan perusahaan farmasi yang cabangnya telah tersebar di seluruh Indonesia. Saat ini PT. Dipa Pharmalab Intersains sedang membutuhkan:

MEDICAL REPRESENTATIVE

Responsibilities:
1. Melakukan kunjungan ke rumah sakit.
2. Menjaga hubungan dengan dokter.
3. Melakukan survey ke apotek.

Requirements:
1. Pendidikan minimal SMA.
2. Usia maksimal 28 tahun.
3. Berpengalaman menjadi medical representative minimal 1 tahun.
4. Mempunyai kendaraan (motor & SIM C).
5. Mau bekerja keras dan menyukai tantangan.

CLOSING DATE: 02-Feb-2014

LAMARAN ONLINE: Via Jobstreet

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

PT. Balatif

Description:

Bidang usaha PT Balatif - perusahaan farmasi dan herbal - mempunyai ikatan yang sangat erat dengan kehidupan dan manusia, membuat PT. Balatif berkomitmen untuk memperkaya kehidupan, melalui nilai-nilai ketulusan, tanggung jawab, saling menghargai, bekerjasama dan kreatifitas. Memperbaiki, meningkatkan kesehatan dan kualitas hidup adalah tujuan kami.

Job Description:
Menjalankan program pemasaran dan penyebaran produk, mampu rnelakukan negosiasi ke bidan, mantri, dokter kabupaten.

Requirements:
1. Pendidikan minimal SMA/ sederajat.
2. Pengalaman minimal 1 tahun pada posisi yang sama atau penjualan ke bidan/ mantri/ dokter kabupaten.
3. Memiliki SIM C dan kendaraan roda dua.
4. Target dan consumer oriented.
5. Interview di Kediri, Jombang dan Situbondo. Waktu akan ditentukan kemudian.
6. Memiliki kemampuan untuk negosiasi, organisasi, analisa, dan team work.
7. Menjalin dan menjaga relasi dengan customer.
8. Mempunyai networking dan data base yang luas.

Registrasi Online: Lokaljob

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

Tiara Supermarket

Posisi:

1. CLEANING SERVICE (Kode: Ce Es) : Dimasukkan map warna BIRU
2. KASIR / PARKIR (Kode: CSR/ PK): Dimasukkan map warna HIJAU
3. OFFICE (Kode: OF): Dimasukkan map warna KUNING
4. LEADER (Kode: LDR): Dimasukkan map warna MERAH
5. PARUH WAKTU (Kode: PT): Dimasukkan map warna KUNING
6. SATPAM (Kode: Security): Dimasukkan amplop warna COKELAT

Syarat-Syarat:

1. Laki-laki/ perempuan dengan tinggi minimal 155 cm.
2. Pendidikan minimal SMU/ sederajat.
3. Surat lamaran pekerjaan.
4. Foto berwarna terbaru ukuran 3x4 (2 lembar).
5. Foto kopi KTP dan Kartu Keluarga.
6. Foto kopi ijazah terakhir dan transkrip nilai.
7. Punya integritas, visi, kreativitas dan motivasi untuk maju
8. Nomor telepon yang bisa dihubungi setiap saat.
9. Surat lamaran ditulis visi, misi, dan goal dalam hidup (khusus posisi LEADER).
10. Memiliki ijazah satpam (khusus posisi SATPAM).

LAMARAN DISERAHKAN DI COUNTER PENITIPAN BARANG 
Tiara Supermarket 
Jalan Ahmad Yani (Ring Road, Sebelah Timur Terminal Lama) 
Klitik, Ngawi

NB:  
Untuk Tes Masuk Kerja Tiara Supermarket, Mengganti Uang Tes ( Psikotes ) Senilai Rp.100.000,- Yang Dibayarkan Waktu Panggilan Psikotes ( Tes IQ, Aritmatika, Logika dan Kepemimpinan). Uang Tes Akan Dikembalikan Jika Masa Kerja Lebih Dari 3 Bulan ( Kontrak Kerja ).

Tahapan Diterima Keja di Tiara Supermarket:
- Tahap I : Psikotes
- Tahap II : Interview
- Tahap III : Panggilan masuk kerja


Sumber: Tiara Supermarket 
  

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

PT. Cemerlang Jaya

PT. Cemerlang Jaya bergerak di bidang penjualan obat-obatan herbal. Saat ini PT. Cemerlang Jaya Ngawi membutuhkan:

MARKETING

Requirements: 
1. Pria/ Wanita
2. Pendidikan tidak diutamakan
3. Mempunyai motor dan SIM C
4. Mempunyai potensi penjualan yang tinggi


Kirim Lamaran Lengkap ke:
PT. Cemerlang Jaya
Jalan Trunojoyo No. 41B, Ngawi

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

Paket Kilat JNE Ngawi

PRAMUNIAGA

Requirements:
1. Cewek
2. Pendidikan minimal SMU/ sederajat
3. Diutamakan tempat tinggal dekat terminal Kertonegoro, Ngawi
4. Jujur
5. Pengalaman kerja tidak diutamakan

Kirim Lamaran ke:
Paket Kilat JNE Ngawi
Jl. S. Parman 20 Ngawi (08113314111)

SEGERA!!!

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

PT. Smartfren Telecom Tbk.

CUSTOMER SERVICE STAFF

Requirements:
1. Usia maksimal 26 tahun (pada tahun 2014)
2. Pendidikan minimal D3
3. Berpenampilan menarik, service oriented, komunikatif
4. Bisa mengoperasikan komputer dan lebih disukai mampu berbahasa Inggris
5. Lebih disukai memiliki pengalaman sebagai Customer Service, khususnya di industri telekomunikasi, service center, perbankan, asuransi dan front desk industri jasa lainnya.
6. Bersedia ditempatkan di wilayah Madiun, Magetan, Ngawi, Nganjuk, Ponorogo, Pacitan

Registrasi Online: Via Jobstreet

Closing Date: 02-Feb-2014

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

Cahaya Sakti Motor

LOWONGAN:

1. Supervisor Marketing (Cabang Karangjati)
2. Marketing (Cabang Karangjati dan Jrubong-Ngawi)

Syarat:
1. Pria/ Wanita
2. Min. SMU/ Sederajat
3. Pengalaman min. 1 tahun di bidangnya (untuk posisi supervisor marketing)
4. Jujur, ulet, dan bisa kerja tim

Kirimkan Surat Lamaran dan CV ke:
Cahaya Sakti Motor 
Jl. PB. Sudirman no. 100 Jrubong, Ngawi (untuk cabang Jrubong)
Jl. Raya Caruban Ngawi no. 36 Karangjati, Ngawi (untuk cabang Karangjati)

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

PT. Thiess Contractors Indonesia

Thiess Contractors Indonesia (TCI) is a multinational company with over 9,500 employees throughout our projects in Indonesia. Our people are our keys to success. Our business has been providing integrated mining and construction services in civil, process facilities and mining across Indonesia for over 25 years.

With the opening of a new project in Central Java for Solo Ngawi Toll Road D & C, an excellent opportunity for  some levels have arisen to join our new project and based on site.

  1. SCHEDULER/ PLANNER
     Job Descriptions: 
Reporting to the Superintendent Planning, you will responsible to ensure the successful delivery of the project within the required quality, budged and time constraints and to the client's valid requirements; To plan, lead, organise and control the project resources to maximise the achievement of the company's objectives; Ensure that planning and programming of site activities is monitored to meet and achieve required milestones.

    Qualifications:
To be successful in this role you will need to have a bachelor degree in Engineering with minimum 5 years experiences in similar role preferably in Multi Discipline Works and EPC type Project; proficient in scheduling (utilizing software such as Primavera 8.2, and equivalent Software), construction methods, resources analysis and planning, and contract obligations; strong knowledge on concrete structures, road works; extensive experience in earthworks, road works (truck hauling road, urban city road, both flexible and rigid pavement), bridges and concrete superstructure works; have an understanding of the following disciplines: construction regulations, industry codes and standards, workplace health & safety regulations, quality assurance, construction techniques and processes; computer literacy including proficient in MS. Office / IT literate or equivalent; fluent in English both oral and written; good communication skill; able to communicate to all level (internal/external), diligent; good in planning and organizing; strong leadership, self-motivated, ability to influence, innovative and problem solving, supportive, communicative, and able to work under pressure are preferred character traits.

      2.  SENIOR ENGINEER PROJECT CONTROL

       Job Descriptions:   
Reporting to the Project Commercial Manager you will responsible to assist Commercial Manager in the Cost Controlling and Commercial Reporting; Ensure the Acumen of Site Staff on Commercial matter; Supervise and maintain Estimate quantities and costs of change orders; Provide and an estimate in the end of month process (Invoice, CV, Cash Call, etc.); Lead and supervise Estimate forecast quantities/cost at completion; and Supervise Tracking of actual quantities/progress against budget.

     Qualifications:
To be successful in this role you will need to hold Degree in Civil Engineering or D3 with extensive experiences; you must have a minimum 3 years' experience in similar role; has Knowledge of private business reporting standards, analysis and documentation of cost trends, earned value calculation, and commercial risk analysis and reporting; you should proficient in JDE Project Management Module and detailed understanding of all aspects of the cost control processes; has ability to develop cost control processes that will be applicable for when works are executed and to assemble information necessary for the letting of procurement packages; have an independent and mature personality, self-motivated, result driven and good interpersonal skills; good communication skills and proficient in written and spoken in English and Bahasa Indonesia; computer literacy including proficient in MS. Office; attention to detail; flexibility to cope with the changing demands of a project in the mobilization phase; strong leadership, ability to influence, planning and organizing, logical thinking, innovative and problem solving, and able to work under pressure are preferred character traits. 

        3.  SENIOR ENGINEER PROJECT

        Job Descriptions: 
Reporting to the Superintendent Engineer, you will responsible to
•  Provide technical direction for all Engineering works from contract award through to commissioning phase.
•  Liaise with Client Engineer Reps on all aspect of Site Engineering.
•  Liaise with Design Consultant for all Engineering matters (include but not limited to RFIs, TQs, Design for Temporary Works) and ensure they are being inform to Site Supervisions by providing continuous assistance.
•  Provide support on QA and QC.
•  Provide support to Project Controls team on producing Quantity Take Offs, Progress of Works.
•  Plan and control permanent material purchases. Work collaboratively with QC/Material Engineers to ensure all procured material meet technical requirements.
•  Expediting procurement and logistics to ensure site crew have all the required materials, equipment, manpower and services on schedule.
•  Ensure that planning and programming of site activities and procurement is monitored to meet and achieve required milestones.

      Qualifications:
To be successful in this role you will need to have a bachelor degree in Engineering with minimum 5 years' experiences in similar role and site experience is desirable; has extensive experience in Earthworks, Road works (truck hauling road, urban city road, both flexible and rigid pavement), bridges and concrete superstructure works; Strong knowledge on Concrete Structures, Road Works; understanding on Rigging & Lifting, Scaffolding, Crane Load Chart; have an understanding of the following disciplines: construction regulations, industry codes and standards, workplace health & safety regulations, quality assurance, construction techniques and processes;; computer literacy including proficient in MS. Office, Microsoft Project or equivalent; fluent in English both oral and written; good communication skill; able to communicate to all level (internal/external), diligent;  analytical and attention to detail; good in planning and organizing; strong leadership, self-motivated, ability to influence, innovative and problem solving, supportive, communicative, and able to work under pressure are preferred character traits. 

     4. SURVEYOR

     Job Descriptions:
Reporting to the Superintendent Engineer, you will responsible to assist the Senior Surveyor to manage and co-ordinate survey office/field activities to provide appropriate survey service to construction, mine planning, reconciliation and design personnel to enable accurate design, construction and mine planning of all site activities.

     Qualifications:

To be successful in this role you will need to have Tertiary Qualifications in Surveying / Geodetic Engineering with minimum 1 - 3 years Industrial experience in Construction and Mining; Experience in Surveying for Earthworks, Road works (truck hauling road, urban city road, both flexible and rigid pavement), bridges and concrete superstructure works; Understanding of Mining and Construction Technology,  Engineering and Surveying Principles including RTK GPS and Total Stations, Surveying Equipment and Applications, and Engineering and Surveying Software; Demonstrate basic of Terramodel or other Surveying Software Package; Understanding of Computer Data Management and Manipulation; computer literacy including proficient in MS. Office, Microsoft Project or equivalent; fluent in English both oral and written; good communication skill; able to communicate to all level (internal/external), diligent;  analytical and attention to detail; good in planning and organizing; strong leadership, self-motivated, ability to influence, innovative and problem solving, supportive, communicative, and able to work under pressure are preferred character traits.

     5.  CONTRACT ADMINISTRATOR

     Job Descriptions:
Reporting to the Contract Manager, you will responsible to assist the Contracts Manager to execute whole of contract administration activities including tender, negotiation and awarding process, respond to contract performance issues and contribute to Thiess corporate objectives.

     Qualifications:
To be successful in this role you will need to hold bachelor degree of quantity surveying or law with minimum of 2 - 3 years' experience in contract related role, cost control or procurement contract area; you should proficient in tendering process, business contract drafting, purchasing experiences; computer literacy including proficient in MS. Office; good negotiation and communication skill and proficient both in written and spoken English; able to communicate to all level (internal/external); diligent; good in planning and organizing; strong leadership, self-motivated, ability to influence, innovative and problem solving, supportive, communicative, and able to work under pressure are preferred character traits. 

     6.   SUPERINTENDENT ENGINEER

     Job Descriptions:
Reporting to the Project Manager you will responsible to:
•  Provide technical advice and direction for all engineering works to support the site establishment works (i.e. batch plant operations, precast yard, rebar shop and access for temporary works);
•  Familiarisation and Verification of technical documents / Approved for Construction Drawings generated by consultants issued by the Design Team, subcontractors & vendors in accordance with project procedures;
•  Prepare Management of Temporary Works Procedure and identify the Temporary Works required for the project, Coordinate with the Temporary Works Consultants / Specialists for a Temporary Works Design, Review the design and Issue the Temporary Works Design to the Design Team / Design Consultant through Keystone Incite for design compliance and Safety in Design;
•  Familiarisation of the design to identify and raise Technical Queries (RFI) relating to the design by obtaining written answers from the Design Team via Keystone Insight, Subcontractors or Vendors in accordance with Project Procedures; Familiarisation of the design to identify and raise Design Change Request (DCR) in accordance with the Project Procedures; Provide support to the Design Team for additional survey / site verification / photos when required for response to the RFI and DCR; Provide necessary information to the Design Team to allow As-Built drawings to be prepared by the Consultant for the Project; Ensure design changes are effectively coordinated.
•  Coordinate and liaise with all parties, statutory activities, client and technical representatives from other organizations for on-site technical matters to ensure proper co-ordination of engineering and construction activities and to ensure timely resolution of matters and approvals.

     Qualifications:
To be successful in this role you will need to graduate from bachelor / master degree in Engineering / Civil Engineering with minimum of 5 years' experience as Sr. Project Engineer in toll road/highway road projects or has experience in subcontract management, or project management; Has minimum 3 years'experience worked for toll road/highway contractors (i.e. ex-Karya's); proficient in civil engineering and financial expertise in civil and structure designs, project planning & scheduling, project cost valuation and resource management focus; You should have strong knowledge about safety, health & environment, strong leadership, self-motivated, ability to influence, innovative and problem solving, having strong motivation, English proficiency spoken and written, computer literate, supportive, communicative, and able to work under pressure are preferred character traits.
     7.  SENIOR QC ENGINEER STRUCTURES/ FABRICATIONS

     Job Descriptions:
Reporting to the QA/ QC Coordinator, you will responsible to
•  Lead, guide and manage the quality related functions of his direct reports (i.e. QC Inspectors) in the monitoring, witnessing and inspection of quality related concrete structures and fabrication activities in accordance with project requirement and schedule to meet project needs on a timely manner;
•  Inspect, verify, monitor and surveillance on quality related earthworks and paving activities in the construction of Toll Road in compliance with project specifications, standards, regulations and contract scope of work and ensure proper documentations;
•  Liaise with the earthworks and paving teams and QC Engineer - Materials to ensure all materials needed for these activities are all tested and compliance with the quality requirements and the contract scope of works prior to usage;
•  Continually improve the operation and efficiency of QA/QC practices across TCI and enhance the skills and development of QA/QC staff across the business.

     Qualifications:
To be successful in this role you will need to hold S1 degree in Civil Engineering with extensive experiences with minimum 8 years' experience in site based; You must have a minimum 5 years' experience in Civil Construction (preferably in roads/ highway/ toll roads) as QC Engineer or higher with minimum of 3 years' experience in earthworks / paving inspection;  You should proficient in Quality Project Management, ISO 9001 : Quality Management System - Requirements, and development of management plans, procedures and corresponding inspection check list, Inspection and Test Plans (I&TPs) and other quality documents; Familiar with various standards such as Indonesia Standards (SNI), Australian Standards, ASSHTO, ACI and British Standard; computer literacy including proficient in MS. Office / IT literate or equivalent; good communication skill and proficient both in written and spoken English; able to communicate to all level (internal/external), diligent; good in planning and organizing; strong leadership, self-motivated, ability to influence, innovative and problem solving, supportive, communicative, and able to work under pressure are preferred character traits. 

     8.   SENIOR QC ENGINEER BATCH PLANT/ LABORATORY/ MATERIALS

     Job Descriptions:
Reporting to the QA/ QC Coordinator, you will responsible to
•  Lead, guide and manage the quality related functions of his direct reports (i.e. QC Inspectors) in the monitoring, witnessing and inspection of quality related materials, batch plant activities and laboratory activities in accordance with project requirement and schedule to meet project needs on a timely manner;
•  Inspect, verify, monitor and surveillance on quality related earthworks and paving activities in the construction of Toll Road in compliance with project specifications, standards, regulations and contract scope of work and ensure proper documentations;
•  Ensure all materials needed for quality related activities are all tested and in compliance with the quality requirements and the contract scope of works prior to usage;
•  Continually improve the operation and efficiency of QA/QC practices across TCI and enhance the skills and development of QA/QC staff across the business. 

     Qualifications:
To be successful in this role you will need to hold S1 degree in Civil Engineering with extensive experiences with minimum 8 years' experience in site based; You must have a minimum 5 years' experience in Civil Construction (preferably in roads/ highway/ toll roads) as QC Engineer or higher with minimum of 3 years' experience in earthworks / paving inspection;  You should proficient in Quality Project Management, ISO 9001 : Quality Management System - Requirements, and development of management plans, procedures and corresponding inspection check list, Inspection and Test Plans (I&TPs) and other quality documents; Familiar with various standards such as Indonesia Standards (SNI), Australian Standards, ASSHTO, ACI and British Standard; computer literacy including proficient in MS. Office / IT literate or equivalent; good communication skill and proficient both in written and spoken English; able to communicate to all level (internal/external), diligent; good in planning and organizing; strong leadership, self-motivated, ability to influence, innovative and problem solving, supportive, communicative, and able to work under pressure are preferred character traits.

     9.  SENIOR QC ENGINEER EARTHWORK/ RIGID AND FLEXIBLE PAVING

     Job Descriptions:
Reporting to the QA/ QC Coordinator, you will responsible to
•  Lead, guide and manage the quality related functions of his direct reports (i.e. QC Inspectors) in the monitoring, witnessing and inspection of quality related earthworks and paving activities in accordance with project requirement and schedule to meet project needs on a timely manner;
•  Inspect, verify, monitor and surveillance on quality related earthworks and paving activities in the construction of Toll Road in compliance with project specifications, standards, regulations and contract scope of work and ensure proper documentations;
•  Liaise with the earthworks and paving teams and QC Engineer - Materials to ensure all materials needed for these activities are all tested and compliance with the quality requirements and the contract scope of works prior to usage;
•  Continually improve the operation and efficiency of QA/QC practices across TCI and enhance the skills and development of QA/QC staff across the business.
 
     Qualifications:
To be successful in this role you will need to hold S1 degree in Civil Engineering with extensive experiences with minimum 8 years' experience in site based; You must have a minimum 5 years' experience in Civil Construction (preferably in roads/ highway/ toll roads) as QC Engineer or higher with minimum of 3 years' experience in earthworks / paving inspection;  You should proficient in Quality Project Management, ISO 9001 : Quality Management System - Requirements, and development of management plans, procedures and corresponding inspection check list, Inspection and Test Plans (I&TPs) and other quality documents; Familiar with various standards such as Indonesia Standards (SNI), Australian Standards, ASSHTO, ACI and British Standard; computer literacy including proficient in MS. Office / IT literate or equivalent; good communication skill and proficient both in written and spoken English; able to communicate to all level (internal/external), diligent; good in planning and organizing; strong leadership, self-motivated, ability to influence, innovative and problem solving, supportive, communicative, and able to work under pressure are preferred character traits.
     10.  SUPERVISOR DOCUMENT CONTROL

     Job Descriptions:
Reporting to the QA/ QC Manager, you will responsible to
•  Lead, guide and manage his direct reports (i.e. Document Controller, and GDP/TMS coordinator) for all matters related to the control of quality related documentations for the toll road construction projects (Solo - Ngawi, Ngawi - Kertosono and Cinere - Serpong) in accordance with project procedures and TMS.
•  Responsible in the implementation, maintenance and uploading of documents in Incite Keystone.
•  Directly responsible for all activities related to the control of documents and records for the projects in accordance with project procedures and TMS. Performs verification, monitoring, surveillance and audit on the documentation process to ensure compliance with project documentation requirements.
•  Continually improve the operation and efficiency of QA/QC practices across TCI and enhance the skills and development of QA/QC staff across the business.

     Qualifications:
To be successful in this role you will need to hold graduate / diploma in any engineering course with minimum 5 years' experience in Document Management for projects; You must have a minimum 3 years' experience as a Document Controller or higher position; You should proficient in Quality Project Management, ISO 9001 : Quality Management System - Requirements, and development of management plans, procedures and corresponding inspection check list; Familiar with various standards such as Indonesia Standards (SNI), Australian Standards, ASSHTO, ACI and British Standard; computer literacy including proficient in MS. Office; good communication skill and proficient both in written and spoken English; able to communicate to all level (internal/external), diligent; good in planning and organizing; strong leadership, self-motivated, ability to influence, innovative and problem solving, supportive, communicative, and able to work under pressure are preferred character traits.
     11.  DOCUMENT CONTROL

     Job Descriptions:
Reporting to the QA/ QC Coordinator, you will responsible for all documentation activities related to the control of documents and records for Solo - Ngawi Toll Road D&C Project in accordance with approved project procedures and management plans; Record and check the accuracy of all incoming and outgoing documents; Maintain at all times a whole and complete control copy (hard & soft) of project technical documents and records; Maintain, update and implement the Project Filing Index at all times; Share, distribute documents / records via incite / outlook to all controlled copy holders; Prepare for the handover of designated documents and records to Clients; Properly archive project documents and records in accordance with project procedures; Comply with all Project Management Plan requirements applicable to this position description.

     Qualifications:
To be successful in this role you will need to hold graduate / diploma in any engineering course with minimum 5 years' experience as Document Control; You should have Knowledge of Document Control System, Quality Project Management, and ISO 9001 : Quality Management System - Requirements; Familiar with various standards such as Indonesia Standards (SNI), Australian Standards, ASSHTO, ACI and British Standard; computer literacy including proficient in MS. Office; good communication skill and proficient both in written and spoken English; able to communicate to all level (internal/external), diligent; good in planning and organizing; strong leadership, self-motivated, ability to influence, innovative and problem solving, supportive, communicative, and able to work under pressure are preferred character traits. 

     12.  QC INSPECTOR BATCH PLANT

     Job Descriptions:
Reporting to the Sr. QC Engineer, you will responsible to plan and coordinate all batch plant daily inspection and testing activates with construction  team in accordance with I&TPs and construction schedule; Inspect, verify, witness and surveillance on quality related batch plant activities in the construction of Toll Road in compliance with project specifications, standards, regulation and contract scope of work and ensure proper documentations; Liaise with the QC Inspector - materials to ensure all materials needed for these activities are all tested  and compliance with the quality requirements and the contract scope of works prior to usage; Continually improve the operation and efficiency of QA/ QC practices across TCI and enhance the skills and development of QA/QC Staff across the business.
     Qualifications:
To be successful in this role you will need to hold S1 degree in Civil Engineering with extensive experiences with minimum 6 year's experience in site based; You must have a minimum 4 years' experience in Civil Construction (preferably in roads/ highway/ toll roads) as QC  Inspector/ Engineer or higher with minimum of 3 year's experience in batch plant inspection and in laboratory and material inspections;  You should proficient in Quality Project Management, ISO 9001 : Quality Management System - Requirements, and development of management plans, procedures and corresponding inspection check list, Inspection and Test Plans (I&TPs) and other quality documents; Familiar with various standards such as Indonesia Standards (SNI), Australian Standards, ASSHTO, ACI and British Standard; computer literacy including proficient in MS. Office / IT literate or equivalent; fluent in English both oral and written; good communication skill; able to communicate to all level (internal/external), diligent; good in planning and organizing; strong leadership, self-motivated, ability to influence, innovative and problem solving, supportive, communicative, and able to work under pressure are preferred character traits.

      13.  QC INSPECTOR EARTHWORKS

     Job Descriptions:
Reporting to the Sr. QC Engineer, you will responsible to plan and coordinate all laboratory and material daily inspection and testing activates with construction  team in accordance with I&TPs and construction schedule; Inspect, verify, witness and surveillance on quality related material and laboratory testing activities in the construction of Toll Road in compliance with project specifications, standards, regulation and contract scope of work and ensure proper documentations; Ensure all materials needed for these activities are all tested  and compliance with the quality requirements and the contract scope of works prior to usage; Continually improve the operation and efficiency of QA/ QC practices across TCI and enhance the skills and development of QA/QC Staff across the business.
     Qualifications:
To be successful in this role you will need to hold S1 degree in Civil Engineering with extensive experiences with minimum 6 years's experience in site based; You must have a minimum 4 years' experience in Civil Construction (preferably in roads/ highway/ toll roads) as QC  Inspector/ Engineer or higher with minimum of 3 years's experience in material inspection and laboratory testing inspection ;  You should proficient in Quality Project Management, ISO 9001 : Quality Management System - Requirements, and development of management plans, procedures and corresponding inspection check list, Inspection and Test Plans (I&TPs) and other quality documents; Familiar with various standards such as Indonesia Standards (SNI), Australian Standards, ASSHTO, ACI and British Standard; computer literacy including proficient in MS. Office / IT literate or equivalent; fluent in English both oral and written; good communication skill; able to communicate to all level (internal/external), diligent; good in planning and organizing; strong leadership, self-motivated, ability to influence, innovative and problem solving, supportive, communicative, and able to work under pressure are preferred character traits.

     14.  QC INSPECTOR LABORATORY & MATERIALS

     Job Descriptions:
Reporting to the Sr. QC Engineer, you will responsible to plan and coordinate all laboratory and material daily inspection and testing activates with construction  team in accordance with I&TPs and construction schedule; Inspect, verify, witness and surveillance on quality related material and laboratory testing activities in the construction of Toll Road in compliance with project specifications, standards, regulation and contract scope of work and ensure proper documentations; Ensure all materials needed for these activities are all tested  and compliance with the quality requirements and the contract scope of works prior to usage; Continually improve the operation and efficiency of QA/ QC practices across TCI and enhance the skills and development of QA/QC Staff across the business. 

     Qualifications:
To be successful in this role you will need to hold S1 degree in Civil Engineering with extensive experiences with minimum 6 years's experience in site based; You must have a minimum 4 years' experience in Civil Construction (preferably in roads/ highway/ toll roads) as QC  Inspector/ Engineer or higher with minimum of 3 years's experience in material inspection and laboratory testing inspection;  You should proficient in Quality Project Management, ISO 9001 : Quality Management System - Requirements, and development of management plans, procedures and corresponding inspection check list, Inspection and Test Plans (I&TPs) and other quality documents; Familiar with various standards such as Indonesia Standards (SNI), Australian Standards, ASSHTO, ACI and British Standard; computer literacy including proficient in MS. Office / IT literate or equivalent; fluent in English both oral and written; good communication skill; able to communicate to all level (internal/external), diligent; good in planning and organizing; strong leadership, self-motivated, ability to influence, innovative and problem solving, supportive, communicative, and able to work under pressure are preferred character traits. 

     15. QC INSPECTOR PAVING (RIGID & FLEXIBLE)

     Job Descriptions:
Reporting to the Sr. QC Engineer, you will responsible to plan and coordinate all rigid and flexible paving daily inspection and testing activates with construction  team in accordance with I&TPs and construction schedule; Inspect, verify, witness and surveillance on quality related rigid and flexible paving activities in the construction of Toll Road in compliance with project specifications, standards, regulation and contract scope of work and ensure proper documentations; Liaise with the QC Inspector - materials to ensure all materials needed for these activities are all tested  and compliance with the quality requirements and the contract scope of works prior to usage; Continually improve the operation and efficiency of QA/ QC practices across TCI and enhance the skills and development of QA/QC Staff across the business. 

    Qualifications:
To be successful in this role you will need to hold S1 degree in Civil Engineering with extensive experiences with minimum 6 years's experience in site based; You must have a minimum 4 years' experience in Civil Construction (preferably in roads/ highway/ toll roads) as QC  Inspector/ Engineer or higher with minimum of 3 years's experience in rigid and flexible paving and/ or earthworks inspection;  You should proficient in Quality Project Management, ISO 9001 : Quality Management System - Requirements, and development of management plans, procedures and corresponding inspection check list, Inspection and Test Plans (I&TPs) and other quality documents; Familiar with various standards such as Indonesia Standards (SNI), Australian Standards, ASSHTO, ACI and British Standard; computer literacy including proficient in MS. Office / IT literate or equivalent; fluent in English both oral and written; good communication skill; able to communicate to all level (internal/external), diligent; good in planning and organizing; strong leadership, self-motivated, ability to influence, innovative and problem solving, supportive, communicative, and able to work under pressure are preferred character traits. 

      16.  QC INSPECTOR FABRICATION

     Job Descriptions:
Reporting to the Sr. QC Engineer, you will responsible to plan and coordinate all fabrication (precast / prestressed / post tension concrete structures) daily inspection and testing activates with construction  team in accordance with I&TPs and construction schedule; Inspect, verify, witness and surveillance on quality related fabrication activities in the construction of Toll Road in compliance with project specifications, standards, regulation and contract scope of work and ensure proper documentations; Liaise with the QC Inspector - materials to ensure all materials needed for these activities are all tested  and compliance with the quality requirements and the contract scope of works prior to usage; Continually improve the operation and efficiency of QA/ QC practices across TCI and enhance the skills and development of QA/QC Staff across the business. 

     Qualifications:
To be successful in this role you will need to hold S1 degree in Civil Engineering with extensive experiences with minimum 6 year's experience in site based; You must have a minimum 4 years' experience in Civil Construction (preferably in roads/ highway/ toll roads) as QC  Inspector/ Engineer or higher with minimum of 3 years's experience in fabrication of concrete structures and/ or concrete structure erection inspections;  You should proficient in Quality Project Management, ISO 9001 : Quality Management System - Requirements, and development of management plans, procedures and corresponding inspection check list, Inspection and Test Plans (I&TPs) and other quality documents; Familiar with various standards such as Indonesia Standards (SNI), Australian Standards, ASSHTO, ACI and British Standard; computer literacy including proficient in MS. Office / IT literate or equivalent; fluent in English both oral and written; good communication skill; able to communicate to all level (internal/external), diligent; good in planning and organizing; strong leadership, self-motivated, ability to influence, innovative and problem solving, supportive, communicative, and able to work under pressure are preferred character traits. 

     17.  QC INSPECTOR STRUCTURES

     Job Descriptions:
Reporting to the Sr. QC Engineer, you will responsible to plan and coordinate all structures (OP / UP/ Bridges / Pedestrians / Interchanges, etc.)  daily inspection and testing activates with construction  team in accordance with I&TPs and construction schedule; Inspect, verify, witness and surveillance on quality related structure erection activities in the construction of Toll Road in compliance with project spesifications, standards, regulation and contract scope of work and ensure proper documentations; Liaise with the QC Inspector - materials to ensure all materials needed for these activities are all tested  and compliance with the quality requirements and the contract scope of works prior to usage; Continually improve the operation and efficiency of QA/ QC practices across TCI and enhance the skills and development of QA/QC Staff across the business. 

     Qualifications:
To be successful in this role you will need to hold S1 degree in Civil Engineering with extensive experiences with minimum 6 years's experience in site based; You must have a minimum 4 years' experience in Civil Construction (preferably in roads/ highway/ toll roads) as QC  Inspector/ Engineer or higher with minimum of 3 years's experience in structure and / or fabrication inspection ;  You should proficient in Quality Project Management, ISO 9001 : Quality Management System - Requirements, and development of management plans, procedures and corresponding inspection check list, Inspection and Test Plans (I&TPs) and other quality documents; Familiar with various standards such as Indonesia Standards (SNI), Australian Standards, ASSHTO, ACI and British Standard; computer literacy including proficient in MS. Office / IT literate or equivalent; fluent in English both oral and written; good communication skill; able to communicate to all level (internal/external), diligent; good in planning and organizing; strong leadership, self-motivated, ability to influence, innovative and problem solving, supportive, communicative, and able to work under pressure are preferred character traits. 

      18.  ENGINEER CONCRETE PRE-CAST

     Job Descriptions:
Reporting to the Sr. Engineer Concrete Pre-Cast, you will responsible to plan and manage production of concrete pre-cast consist of but not limited to girder beams, slab, box culvert etc.; monitor and report productivity of pre-cast concrete yard; monitor fabrication as per schedule and priority. 

     Qualifications:
To be successful in this role you will need to hold S1 degree in Civil Engineering or D3 with extensive experiences with minimum 3 years in experience in major construction industry especially in major concrete pre-cast company; you must have an experience in concrete pre-cast production (plan, construct, monitor and report; and site experience is desirable. You should have complete PPJK course, have an understanding of the following discipline such construction regulations; industrial codes and standards; workplace health & safety regulations; quality assurance; construction techniques and processes; strong knowledge of concrete pre-cast technology; computer literacy including advance skill in MS. Office & knowledge of Microsoft Project or equivalent, fluent in English both oral and written; good communication skill; able to communicate to all level (internal/external), diligent; good in planning and organizing; strong leadership, self-motivated, ability to influence, innovative and problem solving, supportive, communicative, and able to work under pressure are preferred character traits. 

     19.  ENGINEER REBAR BENDING SCHEDULE

     Job Descriptions:
Reporting to the Sr. Engineer, you will responsible to produce rebar bending schedule for all structural concrete work using rebar schedule software (template); to monitor and report productivity of rebar shop; to monitor rebar fabrication as per schedule and priority; to monitor rebar stock and minimize rebar waste. 

     Qualifications:
To be successful in this role you will need to hold S1 degree in Civil Engineering or D3 with extensive experiences with minimum 3 years in experience in major construction work; experience in creating / preparing rebar bending schedule and site experience is desirable. You should have complete PPJK course, have an understanding of the following discipline such construction regulations; industrial codes and standards; workplace health & safety regulations; quality assurance; construction techniques and processes; strong knowledge of rebar schedule software; computer literacy including advance skill in MS. Office & knowledge of Microsoft Project or equivalent; knowledge of other industry software such as AutoCAD and structural software is desirable; fluent in English both oral and written; good communication skill; able to communicate to all level (internal/external), diligent; good in planning and organizing; strong leadership, self-motivated, ability to influence, innovative and problem solving, supportive, communicative, and able to work under pressure are preferred character traits. 

     20.  SENIOR ENGINEER PRE-CAST

     Job Descriptions:
Reporting to the Production Manager, you will responsible to Leading the production of concrete pre-cast consist of but not limited to girder beams, slab, box culvert etc.; making plan and manage day to day pre-cast production either self-production or under sub-contract; monitor and report productivity of pre-cast concrete yard; monitor fabrication as per schedule and priority.

     Qualifications:
To be successful in this role you will need to hold S1 degree in Civil Engineering or D3 with extensive experiences with minimum 7 years in experience in major construction industry especially in major concrete pre-cast company; you must have an experience in concrete pre-cast production (plan, construct, monitor and report; and site experience is desirable. You should have complete PPJK course, have an understanding of the following discipline such construction regulations; industrial codes and standards; workplace health & safety regulations; quality assurance; construction techniques and processes; strong knowledge of concrete pre-cast technology; computer literacy including advance skill in MS. Office & knowledge of Microsoft Project or equivalent, fluent in English both oral and written; good communication skill; able to communicate to all level (internal/external), diligent; good in planning and organizing; strong leadership, self-motivated, ability to influence, innovative and problem solving, supportive, communicative, and able to work under pressure are preferred character traits. 



CLOSING DATE: 31-JAN-2014

Sumber: PT. THIESS

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS